What is the difference between Wave Absorption vs. Rough Water Mode?


Wave Absorption is a built-in floating suspension that allows your boat to move up and down in moderate waves and chop without affecting anchoring.

Rough Water Mode is a software feature that you can turn on and off as needed. When Rough Water Mode is turned on, the anchoring sequence (Auto-Drive) will repeat itself three times with ten-second delays between each sequence, and then stop until the user re-initiates the sequence by pressing down on the control panel or the remote. Rough Water Mode will remain on until 1) the user manually turns it off at the control panel, or 2) one hour of inactivity passes.

Back to Search Results