Flash Player 9 or better is required to view this site. Please visit Adobe.com to install the latest version.
Arm yourself with the ultimate weapon against saltwater. Riptide SF features fewer moving parts, tighter tolerances and our revolutionary Mono Arm for unwavering toughness. While features like an easy-to-use cam-lock depth adjuster make day-to-day operation easier, SF doesn’t give up an ounce of power, silence or rugged reliability. It’s everything you need to put saltwater in its place.
Choosing the correct shaft length is important so that the angler’s electric motor does not cavitate, creating fish-spooking noise. The rule of thumb is that the top of the motor section should be submerged 12". In general, shaft length selection is more critical with bow-mount motors versus transom-mount motors. Most boat transoms are similar in their distance to the water, and Minn Kota’s standard transom shaft lengths should be adequate. With bow-mounted motors, there is much greater variation in shaft length requirements. Measure down from the mounting surface of the transom or bow to the water level. Add 5" to waterline measurement for fishing in rough water. Add 12" to waterline measurement for steering a hand control motor while standing. Use this measurement and the tables below to find the appropriate shaft length.
Transom GuideTransom to Waterline Recommended Shaft Length0"-10"30"10"-16"36"16"-20"42"Over 22"Consult Factory
Bow GuideBow to Waterline Recommended Shaft Length0"-10"36"16"-22"42"22"-28"48"-52"28"-34"54"-62"
Engine Mount GuideMinimum clearance required from spine of outoard to end of cavitation plate (see diagram at right).Cavitation plate to waterline 13" (minimum).
Boats do not tend to go in a straight line. Because of this, it is much easier to pull a boat than to push a boat. It is also easier to move the bow of the boat sideways compared to moving the transom. Therefore, a bow-mounted electric trolling motor allows for much greater boat control and positioning. If quick-response boat control and positioning is what you are looking for, a Minn Kota bow-mount electric trolling motor is a must.
Charge your batteries – and extend their overall life – with this three-bank, 15-amp Precision Charger.
This 3-bank charger puts out 10 amps per bank for 30 amps of total output.
Remove your motor quickly and easily for a clear deck, with this strong, corrosion-resistant composite bracket.
Get the latest news on products, promotions and special offers from Minn Kota.